# Potholes: repair options from patch to replace

> Pothole repair options: cold patch for a stopgap, hot-mix patching at $100-$400, base repair, overlay at $3-$7 per sq ft, and replacement at $8-$15.

Canonical: https://drivewaysealinglab.com/potholes-repair/

Last updated: 2026-11-09

Pothole repair options range from a bag of cold patch to full replacement, and the right one depends on why the hole formed. A single hole in an otherwise sound driveway is a $100 to $400 hot-mix patch. Holes that keep returning in the same place are a base problem, and patching them repeatedly costs more than fixing the cause.

## What a pothole actually is

A pothole is a bowl-shaped depression in asphalt where material has broken away, usually after water entered a crack, froze, expanded, and loosened the pavement.

The visible hole is the end of a process that started with water and a weak spot in the base. That is why the repair has to consider the base, not just the surface.

## The options compared

| Option | Cost | Life | Best for |
| --- | --- | --- | --- |
| Cold patch | A few dollars per bag | One season to a few years | Winter stopgap |
| Hot-mix patch | $100-$400 per pothole | Several years | Isolated holes, sound base |
| Base repair plus patch | Above the patch rate | 5-10 years | Soft or hollow base |
| Overlay | $3-$7 per sq ft | 10-15 years | Several holes or widespread cracking |
| Replacement | $8-$15 per sq ft | 20+ years | Base failed across the driveway |

The prices escalate quickly, and so does the durability. The skill is not choosing the cheapest option; it is choosing the one that matches the failure.

One more option sits outside the table: doing nothing. A pothole left open collects water, and each freeze widens it. The edges break back, the hole grows, and debris spreads onto the surrounding pavement where traffic grinds it into the surface. A $150 repair in spring becomes a $400 repair with base work by autumn, which is the practical argument for acting while the hole is small.

## Hot-mix patching: the standard repair

A proper hot-mix patch is a small construction job.

The perimeter is saw-cut square. The failed material and any loose base are removed. Aggregate is added and compacted where the base has hollowed out. Hot mix is placed in lifts and compacted to match the surrounding grade. The joint is sealed.

That sequence is why a pothole costs $100 to $400. On a 2 square foot hole at $250, the material is a small share and the labor is the rest.

A hot-mix patch on a sound base lasts several years. On a failed base it lasts until the next wet season, because the cause was never addressed.

## When the base is the problem

Three signs say the hole is a symptom.

It returns within a year despite a proper patch. The material under the pavement is moving or soft.

It sits in a depression where water collects. Drainage is feeding the failure.

The surrounding pavement shows an alligator pattern or cracks radiating from the hole. The surface around it has lost structural capacity.

In those cases, the repair is excavation and base correction before any patching. Skipping that step is the most common reason pothole repairs fail.

Our [potholes prevention](https://drivewaysealinglab.com/potholes-prevention/) guide covers the drainage and base conditions that create holes in the first place.

## Overlay versus repeated patching

When holes are scattered and the surrounding surface is worn, an overlay at $3 to $7 per square foot often costs less than patching each area.

On a 600 square foot driveway, an overlay is $1,800 to $4,200. Patching four holes at $250 each is $1,000, and if two return within three years the total passes the overlay.

The overlay also resets the surface, which means the next few years of maintenance are sealing at $0.15 to $0.30 per square foot rather than repeated repairs.

An overlay is only appropriate when the base can be corrected. Overlaying a failed base reproduces the failure in the new surface within a few years.

## Replacement: the last option

Full replacement at $8 to $15 per square foot removes the pavement, rebuilds the base, and paves fresh.

It is the right answer when the base has failed broadly, when settlement cannot be graded out, or when the pavement is broken into loose plates across the driveway.

On 600 square feet, replacement is $4,800 to $9,000. That is a large number, and against a decade of patching at $1,000 every few years plus sealing, it can still be the cheaper path.

## How to choose in five steps

1. Measure the pothole and note its depth.
2. Probe the base; soft or hollow means base repair is needed.
3. Check for water standing nearby or draining into the hole.
4. Count how many holes there are and how often they return.
5. Choose: cold patch for a stopgap, hot mix for isolated holes, overlay for scattered failure, replacement for a failed base.

A contractor who quotes a patch without probing the base is quoting a surface repair. That may be fine for a single hole in sound pavement, and it is not fine for a hole that has been patched twice already.

## Preventing the next hole

Potholes start with water entering the surface. Four habits reduce the odds.

Fill cracks at $2 to $5 per linear foot before winter, so water has fewer routes in.

Seal on a two-to-four-year cycle at $0.15 to $0.30 per square foot.

Keep edges supported, because a crumbling edge lets water under the pavement.

Correct drainage so water does not stand or run across the surface.

Those are maintenance costs, and they are far below the repair costs above. The comparison is the argument for doing them. Our [potholes cost](https://drivewaysealinglab.com/potholes-cost/) page prices each repair in more detail, and [cold patch reviews](https://drivewaysealinglab.com/cold-patch-reviews/) covers the temporary option honestly.